AAS densities and displacment

[charliebigspuds]

thought this would be good here..old but good..

By: Mr.Rose


I have a new article to post up, and It involves that little bit of information that EVERYONE neglects... Displacement!!

What was that Newbie? You thought it was 0.75 or 0.85 mL's per gram of powder. Oh how wrong you were. Ask yourself how can every steroid with so many different ester weights, weight the same? They can't. So I have done what I always do, save the day with my articles.

Lets look at the chart. I have only added a short list for now, I will update it as I have time.

Densities of Common Steroid Powders (Dry Weight) per mL aka CC aka cm^3.

Testosterone Base - Density 1.12g/mL
Testosterone Propionate - Density 1.10g/mL
Testosterone Enanthate - Density 1.06g/mL
Testosterone Cypionate - Density 1.10g/mL
Testosterone Decanoate - Density 1.04g/mL
Testosterone Isocaproate - Density 1.07g/mL
Testosterone Phenylpropionate - Density 1.13g/mL
Trenbolone Acetate - Density 1.18g/mL
Trenbolone Enanthate - Density 1.10g/mL
Nandrolone Decanoate - Density 1.04g/mL
Masterone propionate - Density 1.07g/mL

Ok but what does that all mean Mr.Rose? It means when we add 1 gram of powder to our solvent mixture (that's the oil, BB, BA mix) it will displace the mixture at this amount:

Testosterone Base - 1g Displaces 0.893mL
Testosterone Propionate - 1g Displaces 0.909mL
Testosterone Enanthate - 1g Displaces 0.943mL
Testosterone Cypionate - 1g Displaces 0.909mL
Testosterone Decanoate - 1g Displaces 0.962mL
Testosterone Isocaproate - 1g Displaces 0.935mL
Testosterone Phenylpropionate - 1g Displaces 0.885mL
Trenbolone Acetate - 1g Displaces 0.848mL
Trenbolone Enanthate - 1g Displaces 0.909mL
Nandrolone Decanoate - 1g Displaces 0.962mL
Masterone Propionate - 1g Displaces 0.935mL

Now for the love of god PLEASE STOP using 0.75 or 0.85mL per gram. It won't matter much if you make 10-50mL but when you make a lot... you will screw up dosages and ratio's.

 

[bigdaddyo1617]

thank u for the post

 

[Presser]

Looks like a good post lol I have no idea what it means lol but it looks important lol

 

[charliebigspuds]

wont matter if u are making 5-10g...but if you make a large amount and you dont take into acount the displacment you final product might be out by as much as +- 10ml which in terms of ml to mg you might think your product is 300mg and its really 240...or visas versa..
most people i will just use 1mg=1ml and nothing wrong with that its what i would do..any how just thought it was a good place for it to be..

 

[Millennial Monster]

Gettin ready for the big one had to refresh myself on the displacement. Time to make the donuts.

 

[Presser]

yeah i don't get the whole displacement thing, i mean if you already have a big empty vial say 100ml vial, and ahead of time you mark off the 100ml mark exactly by filling it with 100ml of water, or whatever, then you already know where to fill the oil to on top of the powder/ba/bb mixture. So you really don't need to know the displacement if you know ahead of time where to fill the vial up to.

example, if I'm making 10 vials of propionate, at 100mg/ml , thats 1 gram per vial, times 10 vials, so thats 10 grams of powder, you add in your ba and bb on top of the 10 grams of propionate powder , let it dissolve properly, then you fill the vial with your oil to the mark you already made ahead of time for 100ml. VOILA thats it!

No need to know the displacement BS above. easy peasy

 

[THE 67]

thought this would be good here..old but good..

By: Mr.Rose


I have a new article to post up, and It involves that little bit of information that EVERYONE neglects... Displacement!!

What was that Newbie? You thought it was 0.75 or 0.85 mL's per gram of powder. Oh how wrong you were. Ask yourself how can every steroid with so many different ester weights, weight the same? They can't. So I have done what I always do, save the day with my articles.

Lets look at the chart. I have only added a short list for now, I will update it as I have time.

Densities of Common Steroid Powders (Dry Weight) per mL aka CC aka cm^3.

Testosterone Base - Density 1.12g/mL
Testosterone Propionate - Density 1.10g/mL
Testosterone Enanthate - Density 1.06g/mL
Testosterone Cypionate - Density 1.10g/mL
Testosterone Decanoate - Density 1.04g/mL
Testosterone Isocaproate - Density 1.07g/mL
Testosterone Phenylpropionate - Density 1.13g/mL
Trenbolone Acetate - Density 1.18g/mL
Trenbolone Enanthate - Density 1.10g/mL
Nandrolone Decanoate - Density 1.04g/mL
Masterone propionate - Density 1.07g/mL

Ok but what does that all mean Mr.Rose? It means when we add 1 gram of powder to our solvent mixture (that's the oil, BB, BA mix) it will displace the mixture at this amount:

Testosterone Base - 1g Displaces 0.893mL
Testosterone Propionate - 1g Displaces 0.909mL
Testosterone Enanthate - 1g Displaces 0.943mL
Testosterone Cypionate - 1g Displaces 0.909mL
Testosterone Decanoate - 1g Displaces 0.962mL
Testosterone Isocaproate - 1g Displaces 0.935mL
Testosterone Phenylpropionate - 1g Displaces 0.885mL
Trenbolone Acetate - 1g Displaces 0.848mL
Trenbolone Enanthate - 1g Displaces 0.909mL
Nandrolone Decanoate - 1g Displaces 0.962mL
Masterone Propionate - 1g Displaces 0.935mL

Now for the love of god PLEASE STOP using 0.75 or 0.85mL per gram. It won't matter much if you make 10-50mL but when you make a lot... you will screw up dosages and ratio's.

so which displacement do you use for getting the correct ml for the raws without the bb & ba,oil ?????

 

[THE 67]

hey charlie... do u think tht u could tell me where to get the rest of the displacments for all of the compounds or can you post the rest please ??? thanks

 

[BEASTZ6]

Good post. I usually brew up 100 ml of test cyp at a time using the 1 gr/ml measurment.