Oral Steroid Recipe Compounding for Anadrol, Anavar, Clomid Proviron, Stanozolol

[Presser]

[h=2]Oral Liquid Recipes[/h]

For each hormone I listed ingredients needed. For the procedure scroll down.

Anadrol:
Highest concentration made - 50mg/ml
Per 1 gram of Oxymetholone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol

Anavar:
Highest concentration made - 20mg/ml
Per 1 gram of Oxandrolone powder you will need:
9.8 ml's of PEG 300
39.2 ml's of 190 Proof Grain Alcohol

Armidex:
Highest concentration made - 5mg/ml
Per 1 gram of Anastrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol

Clomid:
Highest concentration made - 50mg/ml
Per 1 gram of Clomiphene Citrate you will need:
8.4 ml's of PEG 600
10.5 ml's 190 Proof Grain Alcohol

Dianabol:
Highest concentration made - 50mg/ml
Per 1 gram of Methandrostenolone powder you will need:
19 ml's of 190 Proof Grain Alcohol
No PEG needed. Follow the no PEG recipe.

Femara:
Highest concentration made - 5mg/ml
Per 1 gram of Letrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol

Nolvadex:
Highest concentration made - 20mg/ml
Per 1 gram of Tamoxifen Citrate you will need:
9.8 ml's of PEG 600
39.2 ml's of 190 Proof Grain Alcohol

Proviron:
Highest concentration made - 50mg/ml
Per 1 gram of Mesterolone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol

Winstrol:
Highest concentration made - 25 mg/ml
Per 1 gram of Stanzolol you will need:
7.8 ml's of PEG 300
31.2 ml's of 190 Proof Grain Alcohol


---------------------------------------------------------------------------------

Solutions requiring PEG and 190 Proof Alcohol

Step 1. Prepare a hot water bath. Boil water in microwave or on a pot. Once boiling starts remove from heat.

Step 2. Place PEG and powder in beaker.

Step 3. Place the beaker deep enough in to the water so that the hot water is level with the PEG and powder. Gently swirl or stir with a stir rod until solution is clear. Reheat water as needed.

Step 4. Allow PEG to cool some. Then add in your 190 proof alcohol. You don't have to do this drop by drop but don't just dump it in. Pour it in slowly.

Step 5. Stir or gently shake until mixed.



For recipes that do not require PEG.

1. Mix powder and 190 proof alcohol.

2. Stir with stir rod or shake. Most powders that do not require PEG will disolve no problem. If heat is needed follow the instructions for heating powders that use PEG​

 

[Presser]

PEG for 5g proviron and 5g anavar then.

What kind of alcohol is 190 Proof Grain Alcohol ?

If I use straight PEG300, it will look like this?!

245ml PEG 300 with 5g Anavar, will make 250ml / 20mg/ml

120ml PEG 300 with 5g Proviron, will make 125ml / 50mg/ml


See Bold


Medical uses

PEG is the basis of a number of laxatives (e.g., macrogol-containing products, such as Movicol and polyethylene glycol 3350, or SoftLax, MiraLAX,ClearLAX, Osmolax or GlycoLax). Whole bowel irrigation with polyethylene glycol and added electrolytes is used for bowel preparation before surgery or colonoscopy. The preparation is sold under the brand names GoLYTELY, GaviLyte C, NuLytely, GlycoLax, Fortrans, TriLyte, Colyte, Halflytely, Softlax, Lax-a-Day, ClearLax and MoviPrep. In the United States, MiraLAX and Dulcolax Balance are sold without prescription for short-term relief of chronic constipation. Miralax is currently FDA approved for adults for a period of seven days, and is not approved for children.[SUP][6][/SUP] A 2007 comparison showed that patients suffering from constipation had a better response to PEG medications than to tegaserod.[SUP][7][/SUP] These medications soften the fecal mass by osmotically drawing water into the GI tract. It is generally well tolerated, however, side effects are possible bloating, nausea, gas, and diarrhea (with excessive use).
When attached to various protein medications, polyethylene glycol allows a slowed clearance of the carried protein from the blood. This makes for a longer-acting medicinal effect and reduces toxicity, and allows longer dosing intervals. Examples include PEG-interferon alpha, which is used to treat hepatitis C, and PEGfilgrastim (Neulasta), which is used to treat neutropenia. It has been shown that polyethylene glycol can improve healing of spinal injuries in dogs.[SUP][8][/SUP] One of the earlier findings, that polyethylene glycol can aid in nerve repair, came from the University of Texas (Krause and Bittner).[SUP][9][/SUP] Polyethylene glycol is also commonly used to fuse B-cells with myeloma cells in monoclonal antibody production.

PEG is used as an excipient in many pharmaceutical products. Lower-molecular-weight variants are used as solvents in oral liquids and soft capsules, whereas solid variants are used as ointment bases, tablet binders, film coatings, and lubricants.[SUP][10][/SUP]
PEG is also used in lubricating eye drops.

Thought that was interesting

 

[Presser]

OLD RECIPE
Anavar:
Highest concentration made - 20mg/ml
Per 1 gram of Oxandrolone powder you will need:
9.8 ml's of PEG 300
39.2 ml's of 190 Proof Grain Alcohol

I heated the grain alcohol and dissolved the var in it, unfortunately not all the VAR dissolves like it should. I then slowly added the PEG 300 and swirled it, still not dissolved. My solution was to mortar and pedestal the powder as fine as I could (remember its oral so this isn't a concern) after I did that and tried it again the same way it completely dissolved. I displaced 1 ml of grain alcohol for 1 gram of kool aide packet fruit punch. Gave it a not so bad kick at 6am and at 6pm lol

 

[Presser]

Humco is the brand of pharmaceutical carrier for orals. Th best that humcp makes is called. Humco Syrpalta, presser you can make any liquid oral by simply adding the dose per ml liquid and simply shaking. . They use this in pharmacies to make children's meds into liquid. Syrpalta taste like grape sorta but just so good you can't believe it and here's how much I trust it I have a relative who is a compounding pharmacist. At 2 yrs old my daughter had o undergo surgery to remove her tonsils. I couldn't believe it but they gave her a script of Vicodin. I was shocked so I took it to my relative who kinda laughed and said don't worry. He too out tabs of Vicodin up to the total mg prescribes an ground them down us in a mortar and pestle. Then used Syrpalta to put the powder in and shook it up. I said u have to be kidding. But it was family. He told me to trust him and to look up compounding literature on this. Sure enough the dosing is accurate, we only gave my daughter one dose but I've used Syrpalta hundreds of times and there is no alcohol no heating simply add powder and shake. You could go a step further and get a steel spatula and hook it into the end of a drill and military that way but I tell you if adding it and shaking wasn't accurate my own family wouldn't risk my 2 yr old daughters life over it. She's 12now so that's been a while. You can by it direct from there website or they have a cherry that is not a good and they carry simple syrup but they have a whole plethora of products. Syrpalta has an NDC but they sell it on the site no questions asked.

Forget the grain alcohol and horrid taste while thanks an effective method Syrpalta is just as effective with no heat and taste great like you want to drink the bottle lol.

 

[Presser]

Made O-T with just 190 proof. Measured everything, put it in a jar, and left it at room temperature.
50mg/ml in alcohol (ethanol)

Letrozole 2.5mg/ml in 190 proof also.

Don't know the purity of the RAWs though.

 

[Presser]

If you need var for your wife just go with Humco Syrpalta. Just buy it direct from their site. I will mention why again because I have no idea where I originally posted this. But anyway I have family who own a compounding pharmacy, when my daughter turned two she had to be put out to undergo surgery to remove her tonsils and adenoids. I was nervous enough because pool are allergic to anesthesia and don't find out until under it and my kid just turned two. No it wasn't major but still surgery.

Anyway afterwards the doc said she's going to be in a great deal of pain , they used a new technique of burning them out as opposed to cutting. Then he handed me her scripts, one of which was vicodin. WTF for a baby lol 2 but still a baby to me, now 13I took this script to my cousin and told him no way possible She was taking vicodin and could he call the doc and change it. He told me no worries. He crushed the tabs with mortar and pestle, then added the now crushed tabs to Humco brand Syrpalta. He had me try it. This tasted so freaking good I asked if it would work for other orals and immediately got a bottle but mg point being if he can add a strong narcotic to it and simply put it on a shaker and told me to shake before each dose. I questioned the accuracy even though it's family which anything they make has to be very very close to exact. Anyway one dose and she was hallucinating so she switched to liquid Motrin and Tylenol and did fine but since then I started making orals with just Syrpalta, no heat just add raw and shake.

Shake before doses sad it works perfect and taste great. I believe it's a grape flavor. Buying it's accurate enough for a kid it's accurate enough for any oral and var for your wife. The cherry IMO is not very good and has a slightly different consistency but I'm sure works as well.

Right now I'm using 50mg/mL dbol in 10ml 190 proof or everclear with the rest peg 300 to make 100ml. It's got a bite but works well.

For this you first add 100 ml peg to your beaker and mark the top. Remove the peg and add 10 ml everclear with your dbol and swirl or stir which should devolve but if not use a little heat then fill the rest to the line u made with peg and I like to heat very low and stir just a bit to burn off some alcohol but dbol s an easy one.

Anyway for the var go with Humco brand Syrpalta. U can sometimes find on eBay but just go to the Humco site and buy it. Makes life so much easier and taste incredible.

 

[Presser]

Here is one Aromasin recipes,hope this can help you:
30mL @ 25mg/mL
Exemestane 0.75g
EtOH (Grain Alcohol-90% pure) - 10mL
Glycerin - 10mL
Distilled Water - 9.25mL

 

[Presser]

• 
  
  

• 
  
  
  
• 

  Originally Posted by LMC ROIDS
  Any chance to get the solutions for turinabol and Testosterone acetate? Thanks
  
  
  
  Made O-T with just 190 proof. Measured everything, put it in a jar, and left it at room temperature. 50mg/ml in alcohol (ethanol) Does any of you guys know if the dissolved gear looses it's potency in alcohol?​
  
  
  
  
  
  
  
  
  
  
  
  
  ​
  
  
  
  
  Reply With Quote​
  
  
• 09-25-2017, 10:59 AM
  #93​
  DefMetalLifter
  

  

  
  MuscleChemistry Registered Member

  

  

  

  

  

  

  

  

  

  

  
  Join DateDec 2013LocationGym or kitchenPosts2,100Credits21,986Thanks (Given)148Thanks (Received)174Likes (Given)932Likes (Received)1089Dislikes (Given)0Dislikes (Received)0
  
  [h=2]
  
  [/h]
  What kind of container are you guys using for the final product? Do I need something sterile or is any closed container ok?​
  
  
  
  
  
  
  Reply With Quote​
  
  
• 10-09-2017, 05:19 AM
  #94​
  thx
  

  

  
  MuscleChemistry Newbie

  
  Join DateJul 2015Posts95Credits524Thanks (Given)6Thanks (Received)11Likes (Given)20Likes (Received)28Dislikes (Given)0Dislikes (Received)0
  
  [h=2]
  
  [/h]
  
  

  

  Originally Posted by DefMetalLifter
  What kind of container are you guys using for the final product? Do I need something sterile or is any closed container ok?
  
  
  
  I usually use some glass jar. Mostly because I want to see if it stays dissolved all the time. You can use whatever you want. Since your taking it orally it doesn't need to be sterile just clean BTW you can use syrPalta to dissolve your orals as Userat24 suggested. Think you can get it on ebay and amazon.Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes​
  
  
  
  is post
  
  
  
  ​
  
  
  
  
  Reply With Quote​
  
  
• 10-09-2017, 11:10 AM
  #95​
  DefMetalLifter
  

  

  
  MuscleChemistry Registered Member

  

  

  

  

  

  

  

  

  

  

  
  Join DateDec 2013LocationGym or kitchenPosts2,100Credits21,986Thanks (Given)148Thanks (Received)174Likes (Given)932Likes (Received)1089Dislikes (Given)0Dislikes (Received)0
  
  [h=2]
  
  [/h]
  
  

  

  Originally Posted by thx
  I usually use some glass jar. Mostly because I want to see if it stays dissolved all the time. You can use whatever you want. Since your taking it orally it doesn't need to be sterile just clean BTW you can use syrPalta to dissolve your orals as Userat24 suggested. Think you can get it on ebay and amazon.
  
  
  
  I was gonna make var into a liquid but was suggests to cap it since it doesn't bond well in liquid. You have any insight on capping. Haven't done that before.​
  
  
  
  
  
  
  Reply With Quote​
  
  
• 10-14-2017, 04:52 PM
  #96​
  thx
  

  

  
  MuscleChemistry Newbie

  
  Join DateJul 2015Posts95Credits524Thanks (Given)6Thanks (Received)11Likes (Given)20Likes (Received)28Dislikes (Given)0Dislikes (Received)0
  
  [h=2]
  
  [/h]
  Yeah bro, it's easy There are cheap capsulefillers on ebay. I think a 100-cap filler costs like 18 bucks (size "0"). Choose filler of choice (preferably a powder that has the same density and looks similar to the raws you are going to mix) Creatine, dextrose, flour, riceflour etc You can also use pestle to mix the raw and filler, I usually don't do this. 1.Weigh out some empty capsules. I usually take like 10 random empty capsules and weigh them out and divide the weight by 10. They usually weigh the same. Example: Capsule 1: 0.10g Capsule 2: 0.10g Cap..... etc. Add all 10 and then divide with 10 so: Example: 0.10 x 10 = 1 1/10 =0.1g Now we know that empty cap weighs 1g. 2. Fill couple of caps with filler of choice. Let's say you filled 10 caps. Weigh each cap and remove the weight of the capsule. We do same thing as before but subtract each cap with 0.1g(the empty capsule) To make it easy, weigh out all 10 filled caps. Depending on what filler you are using and if you press the powder or not the weight of the capsules will be different. Lets say they weigh 0.41-43g each. 4.2g - 1g = 3.2g 3.2/10 = 0.32g So each cap contains 0.32g powder. 3. Let's say you're gonna make 100 capsules containing 50mg of preferred raw. 100 x 50 = 5000mg = 5g raw 100 x 0.32 = 32g filler 32 - 5 = 27g filler 4. Take a zipbag or something. Put 5g of raw and 27g filler. Shake like crazy. (I usually put some extra raw powder, not much) 5. Fill your caps, use 2 cards to spread out the powder, much easier and faster. 6. Ingest caps and grow ​