Mountain_Man
Hiatus
Product Quality
The raw materials used to make any steroid product are crucial to its success. Nothing is more important than the quality of the raws & carriers when it comes to determining product quality. Unfortunately, many UGL's use polluted, low quality raws from cheap sources...and while they may (or may not) contain he primary ingredient, the likelihood of ending up with raws which are pure and properly dosed is low. More so, trying to maintain any type of consistency or product standard is almost impossible, as both purity and potency can vary considerably from one batch to the next, depending on the manufacturer which produced them.
The premier UGL line sold by PSL, Europharm sources its raws & oils directly from foreign pharmacies. I don't think I need to explain the difference in reliability when sourcing raws from pharmacies compared to Chinese manufacturing plants.
ProfessionalOperation
These top-end raw materials are then sent to anotherhigh-tech facility, where they are assembled by knowledgeable and competent staff with significant experience in this industry. Considerable expense is incured during this process. Signs of this extensive operation are found in the products themselves. For example, you will that most of the smaller UGL's...the ones who usually produce their products at home...almost always sell their oral products in capsule form, not pills. This is because a pill press is expensive, especially high quality versions, such as those used by pharmaceutical companies. Pills are the preferred form of delivery with oral consumption, as itallows for easier dosing (you can break pills in half, quarter them, etc) and greater durability.
A step up from capsules would be a low-quality pill-press. These pills made with these machines very often produce pills which lack density, causing them to fall apart very easily. Have you ever receiveda bottle of pills in the mail only to see a bunch of white powder sitting in the bottom of the bottle, along with pills which you could crumble simply by squishing them inbetween your fingers? Lastly, some UGL's, such as PSL/EP use a pharmacy quality pill press, which produces a very hard, dense, evenly shaped tablet. These tablets will maintain their integrity during transport, handling, and storage...and are perfect for tailored dosing, as they are easily broken up into equally divided doses without crumbling into small fragments and/or powder.
Human-Grade Products
For those who prefer to use products produced in a full-scale pharmacy from start to finish, PSL offers a wide variety of HG products are UGL prices! Good luck finding this anywhere else. This is only possible due to the unique associations and alliances which have been formed over the years.
Proper Production Technique
Unfortunately, it is extremely common these days for many UGL products to cause what we have come to call "post-injection pain"or P.I.P, for short. Virtually non-existent in the pharmaceutical industry, PIP has become an everyday occurrence with UGL products, causing users to experience anywhere from minor to severe pain when using these products. Annoying, to say the least, PIP is a result of poor manufacturing practices (relatively spekaing)...plain and simple. Even products such as test prop, when made under U.S. pharmaceutical standards, is 100% pain-free...every time.
The primary reason UGL products cause pip is due to an overabundance of alcohol, which many UGL's add to their oils in order to compensate for inadequate sterilization practices. The bottom line is that it requires a lot ofcostly equipment and the right facilities to ensure that a product is produced under completely sterile conditions. When production at this level is not possible, the only alternative is to flood the product with alcohol as an insurance policy against possible mistakes. Usually, this is sufficient toward off any serious infections, but not always and besides, the user now has to deal with chronic pain and/or irritation because of it.
EP has the finances and resources to produce their products properly and when it comes to the pharm-grade selections, they speak for themselves. You will not find any alcohol-loaded injectables in the EP line. Injections are pain-free. In my own experience, aside from 1-2 very mild occurrences, every single vial of EP I have used over the last 2 years (at least 100 vials) has been a complete pleasure to use. No pain at all. As I stated above, I was harshly reminded just last night that not all products are created the same...and my left qaud testifies with me.
Superior Carriers
Advancements in the industry have lead to notable improvements in many UGL products. This is especially apparent in terms of oil viscosity. Today, many UGL's use relatively thin oils in their injectable products. This allows the product to be administered using much smaller needles. In the case of PSL, our oils can be administered using needles as small as slin pins. Not only does this minimize discomfort duringthe injection process, but it significantly reduces scar tissue build-up, aswell.
Extensive Product Selection
PSL currently offers are impressive array of PED products to choose from, along with future plans for expansion of the line. Some of the products being considered for development are currently non-existent...and would surely generate quite a bit of excitement at their release.
Random Internal Product Testing
PSL regularly conducts random public product testing viauser bloodwork, giving the customer the assurance that they get what they pay for. In an industry of uncertainty and self-governed ethics, lab work remains the gold standard of product assurance.
Product Appearance
Although purely a superficial aspect of any UGL operation, the time and effort invested in making sure that one's product looks the partis indicative of how the company may handle other, more important aspects of the business. This attention to detail directly influences a customer's perception of the product. Even the best quality gear falls short in the eyes of consumers when it looks like shit. To this end, all PSL products showcase a clean and professional appearance, while being designed to minimize the possibility of detection during shipping.
Packaging
Proper packaging is an important part of any UGL. When ordering Dom., proper packaging increases the odds that the products paid for arrive to the customer in the conditione xpected. While broken or damaged product can happen as a result of poor postal worker handling, proper packaging greatly reduces the possibility of this occurring. In my personal experience, out of the 400+amps I have received from PSL in the last 6 months, all arrived in perfect condition. With amps being one of themost delicate items to ship, a 100% success rate is proof-positive of PSL's excellent packaging.
When ordering INTL. proper packaging not only ensures product stability, but reduces the probability of detection.
These are just some of the reasons why I consider PSL to be a first-class operation. In my experiences with both PSL and the products they carry, I have had nothing but positive experiences with them and if the reviews all over the boards are any indication, I would say everyone else tends to feel the same way. several good UGL's out there Isupport, but if not, why should it remain that way?
The raw materials used to make any steroid product are crucial to its success. Nothing is more important than the quality of the raws & carriers when it comes to determining product quality. Unfortunately, many UGL's use polluted, low quality raws from cheap sources...and while they may (or may not) contain he primary ingredient, the likelihood of ending up with raws which are pure and properly dosed is low. More so, trying to maintain any type of consistency or product standard is almost impossible, as both purity and potency can vary considerably from one batch to the next, depending on the manufacturer which produced them.
The premier UGL line sold by PSL, Europharm sources its raws & oils directly from foreign pharmacies. I don't think I need to explain the difference in reliability when sourcing raws from pharmacies compared to Chinese manufacturing plants.
ProfessionalOperation
These top-end raw materials are then sent to anotherhigh-tech facility, where they are assembled by knowledgeable and competent staff with significant experience in this industry. Considerable expense is incured during this process. Signs of this extensive operation are found in the products themselves. For example, you will that most of the smaller UGL's...the ones who usually produce their products at home...almost always sell their oral products in capsule form, not pills. This is because a pill press is expensive, especially high quality versions, such as those used by pharmaceutical companies. Pills are the preferred form of delivery with oral consumption, as itallows for easier dosing (you can break pills in half, quarter them, etc) and greater durability.
A step up from capsules would be a low-quality pill-press. These pills made with these machines very often produce pills which lack density, causing them to fall apart very easily. Have you ever receiveda bottle of pills in the mail only to see a bunch of white powder sitting in the bottom of the bottle, along with pills which you could crumble simply by squishing them inbetween your fingers? Lastly, some UGL's, such as PSL/EP use a pharmacy quality pill press, which produces a very hard, dense, evenly shaped tablet. These tablets will maintain their integrity during transport, handling, and storage...and are perfect for tailored dosing, as they are easily broken up into equally divided doses without crumbling into small fragments and/or powder.
Human-Grade Products
For those who prefer to use products produced in a full-scale pharmacy from start to finish, PSL offers a wide variety of HG products are UGL prices! Good luck finding this anywhere else. This is only possible due to the unique associations and alliances which have been formed over the years.
Proper Production Technique
Unfortunately, it is extremely common these days for many UGL products to cause what we have come to call "post-injection pain"or P.I.P, for short. Virtually non-existent in the pharmaceutical industry, PIP has become an everyday occurrence with UGL products, causing users to experience anywhere from minor to severe pain when using these products. Annoying, to say the least, PIP is a result of poor manufacturing practices (relatively spekaing)...plain and simple. Even products such as test prop, when made under U.S. pharmaceutical standards, is 100% pain-free...every time.
The primary reason UGL products cause pip is due to an overabundance of alcohol, which many UGL's add to their oils in order to compensate for inadequate sterilization practices. The bottom line is that it requires a lot ofcostly equipment and the right facilities to ensure that a product is produced under completely sterile conditions. When production at this level is not possible, the only alternative is to flood the product with alcohol as an insurance policy against possible mistakes. Usually, this is sufficient toward off any serious infections, but not always and besides, the user now has to deal with chronic pain and/or irritation because of it.
EP has the finances and resources to produce their products properly and when it comes to the pharm-grade selections, they speak for themselves. You will not find any alcohol-loaded injectables in the EP line. Injections are pain-free. In my own experience, aside from 1-2 very mild occurrences, every single vial of EP I have used over the last 2 years (at least 100 vials) has been a complete pleasure to use. No pain at all. As I stated above, I was harshly reminded just last night that not all products are created the same...and my left qaud testifies with me.
Superior Carriers
Advancements in the industry have lead to notable improvements in many UGL products. This is especially apparent in terms of oil viscosity. Today, many UGL's use relatively thin oils in their injectable products. This allows the product to be administered using much smaller needles. In the case of PSL, our oils can be administered using needles as small as slin pins. Not only does this minimize discomfort duringthe injection process, but it significantly reduces scar tissue build-up, aswell.
Extensive Product Selection
PSL currently offers are impressive array of PED products to choose from, along with future plans for expansion of the line. Some of the products being considered for development are currently non-existent...and would surely generate quite a bit of excitement at their release.
Random Internal Product Testing
PSL regularly conducts random public product testing viauser bloodwork, giving the customer the assurance that they get what they pay for. In an industry of uncertainty and self-governed ethics, lab work remains the gold standard of product assurance.
Product Appearance
Although purely a superficial aspect of any UGL operation, the time and effort invested in making sure that one's product looks the partis indicative of how the company may handle other, more important aspects of the business. This attention to detail directly influences a customer's perception of the product. Even the best quality gear falls short in the eyes of consumers when it looks like shit. To this end, all PSL products showcase a clean and professional appearance, while being designed to minimize the possibility of detection during shipping.
Packaging
Proper packaging is an important part of any UGL. When ordering Dom., proper packaging increases the odds that the products paid for arrive to the customer in the conditione xpected. While broken or damaged product can happen as a result of poor postal worker handling, proper packaging greatly reduces the possibility of this occurring. In my personal experience, out of the 400+amps I have received from PSL in the last 6 months, all arrived in perfect condition. With amps being one of themost delicate items to ship, a 100% success rate is proof-positive of PSL's excellent packaging.
When ordering INTL. proper packaging not only ensures product stability, but reduces the probability of detection.
These are just some of the reasons why I consider PSL to be a first-class operation. In my experiences with both PSL and the products they carry, I have had nothing but positive experiences with them and if the reviews all over the boards are any indication, I would say everyone else tends to feel the same way. several good UGL's out there Isupport, but if not, why should it remain that way?
