cut blend 300

[viciouscycle]

I am off for the week so I decided to do a little brewing.
made a potent cut-blend of
Tren ace,Mast p, test p @ 100mg each.
I used 2% BA,18%BB, 75% EO and the rest GSO.
so far so good it is Crystal clear and miminim pip .
I'll give it a few days and see how it holds.
This will be my spring cut cycle. I pinned 1ml just to see if it was bearable.

 

[MMX2]

This looks like an awesome blend !
What was the verdict after the first application?

 

[Powderguy]

You still alive bro? lol

 

[viciouscycle]

Yeah it has a little bite to it but not worse then prop.

 

[Powderguy]

I figured it might, decrease the BA to 1.5% and the BB to 14%. You can even do 2% BA and no BB. Not every recipe requires the BB, its a thinner and a solvent and serves not much else purpose than that. It will add to the bite. That's a nice blend though and maybe you should patent it lol

 

[viciouscycle]

Thanks powderguy, if I make it again I'll have to try that.
with this I'll be able to pin 2ml/eod instead of 6ml/eod.
so it was worth a shot.

 

[Powderguy]

Definitely works. I did a masteron/test prop/tren ace blend that was kick ass with just 2%BA and no BB. No PIP and it rocked.

 

[KletoReese]

Wow! This sounds Ace!! Let us know how this goes, looking forward to this. I love this blend and individually they are expensive when purchased.

 

[BuryMeBig]

Definitely works. I did a masteron/test prop/tren ace blend that was kick ass with just 2%BA and no BB. No PIP and it rocked.

Hey PG! I like the sound of this one, whatd you dose it at? mind sharing your ratio's for recipe?

 

[Powderguy]

Yeah its 100/100/75 and it has a total of 1.9mls BB and 1.5mls BB in a GSO carrier. I made 20 mls at a time and heated all my solvents and carrier before I added it and swirled it in a hot water bath, cooled it to room temp looked for separation and then filtered it.

 

[BuryMeBig]

oh so you mean you added everything but the raws together, heated and mixed nicely, then what as it was in a hot water bath you slowly added the raws in bit by bit? let it all cool waited to see if it'd crash, was GTG so you filtered it cold right? so far so good? I like the recipe I wonder if its just about on the verge of crashing or if you could in fact adjust even further? Hell yea great job.hey if you ever need any lab equiptment, feel free to hit me up, im new here but got a loud voice at where I call home hahaha but cheers bro I hook the bro's up with prices that they dont believe... not until the box lands at there doors hahaa

 

[IRISH_SD]

Hey PG,
what do you mean "looked for separation"? What should separate?
thanks man...I need it in Barney terms!
lol

 

[Powderguy]

oh so you mean you added everything but the raws together, heated and mixed nicely, then what as it was in a hot water bath you slowly added the raws in bit by bit? let it all cool waited to see if it'd crash, was GTG so you filtered it cold right? so far so good? I like the recipe I wonder if its just about on the verge of crashing or if you could in fact adjust even further? Hell yea great job.hey if you ever need any lab equiptment, feel free to hit me up, im new here but got a loud voice at where I call home hahaha but cheers bro I hook the bro's up with prices that they dont believe... not until the box lands at there doors hahaa

So I will clarify-add the solvents to the raws heat and swirl them together and you can use a glass rod to mix them, until the solution becomes clear or off white.
You then add the oil little by little heating it gently-when heated it will become supersaturated and form a molecular bond helping to keep your solution from crashing.
Then let sit at room temp then filter.

- - - Updated - - -

Hey PG,
what do you mean "looked for separation"? What should separate?
thanks man...I need it in Barney terms!
lol

By the term "looked for separation" you want to look for swirls, or anything that looks like it is separating-like how oil sits on top of water, separation.
The raws will separate from the solution if they are not supersaturated or heated incorrectly IE-to much heat.

 

[nolimitz]

So I will clarify-add the solvents to the raws heat and swirl them together and you can use a glass rod to mix them, until the solution becomes clear or off white.
You then add the oil little by little heating it gently-when heated it will become supersaturated and form a molecular bond helping to keep your solution from crashing.
Then let sit at room temp then filter.

- - - Updated - - -



By the term "looked for separation" you want to look for swirls, or anything that looks like it is separating-like how oil sits on top of water, separation.
The raws will separate from the solution if they are not supersaturated or heated incorrectly IE-to much heat.

Do you use a water bath to heat the raws with the solvents before adding the oil? Is this method suppose to allow you to use less solvents?
Wouldn't you be able to get everything mixed by adding all the oil in and mixing it in a water bath?

For all my brews I added all of the heated oil into the raws after it is completely mixed with the solvents.

 

[viciouscycle]

Just started another run of this blend 2ml eod 600-800mg each compound per week and feeling awesome!! Very little pip..about 2 days after injection that lasts about 1/2 day, about normal for test prop I guess.

 

[Pristi1340]

Just started another run of this blend 2ml eod 600-800mg each compound per week and feeling awesome!! Very little pip..about 2 days after injection that lasts about 1/2 day, about normal for test prop I guess.

git-r-done vicious! nice blend bud!

 

[KletoReese]

How long could one run such a blend? 12 weeks only or more?

 

[Powderguy]

Do you use a water bath to heat the raws with the solvents before adding the oil? Is this method suppose to allow you to use less solvents?
Wouldn't you be able to get everything mixed by adding all the oil in and mixing it in a water bath?

For all my brews I added all of the heated oil into the raws after it is completely mixed with the solvents.

Yes use a water bath to heat the solvent and dissolve your raws in it. Then after its dissolved or mostly dissolved you can add the oil a little at a time-if you add the whole volume you will supercool it and it will crash-just a little at a time and heat it.
This works well with NPP,TP,Tren Ace, tren E, Test Cyp, or any other raws that's a crystalline powder.

 

[nolimitz]

How would you compare the pip from this blend from something like tne (100mg/ml) if you've used it before? I want to make a tren/mast blend at 100-125mg each per ml. But I don't want to have to deal with bad pip.

 

[Powderguy]

That's very possible. I believe that theres info in another post