How to measure IGF-1 lr3 micrograms on 100 and 50 unit syringes, and I will explain the bact water versus acetic acid confusion

[Muscle mechanic]

That's not what I am saying lol!!!

If your pin is 1ml or 100 units then each 10 mark is 100 mcg if MC IGF

Or is your slin pin is 1/2ml 50units then each 10 mark is 100mcg of MC IGF

The lines are marks between the 10 mark and the 0 should be figured from there!!!

Why this is confusing because photo OP posted shows a 1ml 100mcg slin pin next
To a 50 unit 1ml slin pin. Lol!!!
I posted correct photo on available slin pins most common.

A little further I am versed with mixing my own peptides and hgh!!!
If we have 10 iu hgh in a vial and we put 1ml of water then each 10 unit Mark is
1 iu of hgh!!!

1ml is 1ml and 1/2 is 1/2ml period!!!
If we have a 100 unit 1ml slin pin then each 10 unit mark is 1/10th of total volume.
Count lines between 10 and 0 to figure from there.

If we have a 50 unit 1/2 ml slin pin every 10 mark is still Gonna be 1/10th of 1ml is our total volume of liquid in MC IGF is 1ml of liquid total in vial.
And MC IGF indeed is 1000mcg or 1mg per 1ml liquid volume in vial pre mixed.

U don't draw whole thin to measure, lmao!!!!
U read your bottle 1000mcg per 1ml!!!
U read your pin 100 units per 1ml
Or 50 units per 1/2ml

As said original photo in lost shows
A 100 unit per 1ml next to a 50 unit per 1ml
Which makes it all wrong.

Switch that to a 100 unit 1ml slin
And a 50 unit 1/2ml slin and it will be correct
Now let me double check photo cause is was wrong for a long time now!!!



Sent from my SAMSUNG-SM-G890A using Tapatalk

Yes verified completely wrong 1000mcg MC IGF or any thing in 1000 mcg in 1ml of liquid with never ever fit in a 50 unit 1/2ml slin pin or any 1/2 ml pin!!!

I screwed up from this photo instead of doing my math first time.

Here is OP's photo that is wrong

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Muscle mechanic]

Yes verified completely wrong 1000mcg MC IGF or any thing in 1000 mcg in 1ml of liquid with never ever fit in a 50 unit 1/2ml slin pin or any 1/2 ml pin!!!

I screwed up from this photo instead of doing my math first time.

Here is OP's photo that is wrong

Sent from my SAMSUNG-SM-G890A using Tapatalk

What is wrong here?? Take a look at my post above each of them please follow my instructions.
Because 50 units per 1/2 ml slin
Is same as 50 units on 100 unit 1ml slin.

There will never ever be a volume change for amount of ml.
Look at photo OP photo.
MC IGF is 1000mcg per 1ml
OP made error and this errors may not hurt us with MC IGF and dosing it wrong BUT
Someone can use same diagram and screw up with slin or any peptide.

I am not confused and sorry but only helping and stating the facts

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Muscle mechanic]

To correct OP photo the 50 unit 1/2 ml pin would only have capacity of 500mcg compared to 1000mcg on the on the 100 unit 1ml pin.

It is completely wrong period!!!!
And each 5 mark is 50mcg not another 100mcg.

Please edit this confusing photo that is wrong I misused my IGF until I noticed and had countless people ask me how to do it correct because of confusion

TELL ME HOW CAN 1000MCG OF MC IGF IN 1ML OF LIQUID WILL FIT IN A 50 UNIT 1/2 ML PIN PLEASE!!!
IT'S LIKE FITTING 2 PINTS IN 1 PINT!!! LOL!!
THIS SCREWED ME UP!!! But my fault I always do own math on mg to ml, units per ml and down the line.
I Google search 50 unit 1ml pins and haven't yet to find!!!
I also asked at pharmacy and online lab suppliers I have found none!!!

So the photo showing a 1000mcg MC IGF capacity on both 100 unit 1ml pins and 50 unit 1/2ml is impossible and on both 50 unit and 100 unit every 10 unit mark is 100 mcg if 1mg which = 1000mcg is in 1ml of liquid don't care what is the compound!!!
Lol!!
It's simple:
Mg or mcg is a weight!!!
ML is a volume of liquid!!!
Units are increments on slin pin meant to measure insulin and dummy proof for diabetics to follow label on bottle!!!!
An iu of hgh is an amount of powder of hgh meant to have a certain potency rather than just a weight. Mixing hgh requires same rule of thumb.
If u have 10 iu in a vial add 1ml of BA water or B12 for example. If u used a 100 unit 1ml pin to draw Ba water or b12 it's still 1ml. Each 10 mark is 1 iu hgh after mixed and ready to draw.
U can grab a 50 unit 1/2ml slin pin and draw 10 units and it's still 1 iu hgh!!! Yes sir!!!!
On top of that if u had same another 10 iu vial of hgh to mix. But u only have 50 unit 1/2ml slin pins!!! Then u would fill up twice with ba water or b12 and add to hgh 10 iu vial to mix. It's still same thing grab your 50 unit slin pin and draw to 10 unit mark for 1 iu hgh and so on......
I can explain with mcg or mg or grams etc etc....
I use peptides, MC IGF, IGF that is mixed before use and also in kits of 10x100mcg vial, igf......

I said more than enough but i felt I had to because photo wrong and misleading messed me up for sure!!!!

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Muscle mechanic]

I dont understand why anyone would even try fitting 1,000mcg into .3, .5 or 1cc pin or why that matters? Only way that would matter is if someone wanted to store the entire 1,000mcg in the syringe the whole time, aside from that , it doesn’t matter whether they use any of the 3 sizes mentioned above.

What matters is this boss.
Look at photo in sticky post.
It's wrong!!! That is my point!!!

It shows 1000 mcg on a 50unit 1/2ml pin and says to multiply each tick of 50 tick total times 20 which = 1000!!!!
This is wrong each 10 mark on 50 unit or 100 unit is still 100mcg.
Difference is that.
There is no change in a unit period!!!
Not if they are standard 100 unit 1ml slin pins and 50 unit 1/2ml slin pins!!



Here is problem below in photo I wrote 500 mcg MC IGF capacity over the one showing 5 units to be 100mcg instead of the correct 50mcg of MC IGF
My 500 means 500 mcg total capacity not 1000 as shown. Each 10 mark is same as 100 unit pin equaling 100mcg of MC IGF on both period!!!

So to set this straight it doesn't matter 50 unit 1/2ml pins or 100 unit 1ml pins both have same dose of anything per unit.
Not a different amount like photo shows.

The only difference in either is the capacity that would matter in mixing or what ever.
The unit mark is just an increment not anything else.
Except in insulin 50 unit has 5 Mark and is giving for smaller doses that require 45 units instead of 60 for example.
It is all coded and named on insulin script instructions to avoid a mistake that would... Rich P.... someone.

Not being smart ass but making sure someone sees what i see and stop screwing up like I did on my first IGF run from MC!!

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Muscle mechanic]

I will now keep quiet and hope I helped avoid confusion.

Didn't mean to be smart ass BUT this keeps getting over looked and should be corrected.
There is no multiplying for dosing.
Dividing a volume by an increment after reading label of a weight of substance in a volume we want to measure is safe and necessary.
MC IGF is 100mcg per 10 units on any standard slin pin For humans period!!!
That is simple enough for me!!!
On slin pins with a 5 mark u have 50mcg of MC IGF on 5 mark.
Sorry for the rant or what ever but again trying to explain so we all can be safe and use MC IGF correct



Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Big Beef]

I will now keep quiet and hope I helped avoid confusion.

Didn't mean to be smart ass BUT this keeps getting over looked and should be corrected.
There is no multiplying for dosing.
Dividing a volume by an increment after reading label of a weight of substance in a volume we want to measure is safe and necessary.
MC IGF is 100mcg per 10 units on any standard slin pin For humans period!!!
That is simple enough for me!!!
On slin pins with a 5 mark u have 50mcg of MC IGF on 5 mark.
Sorry for the rant or what ever but again trying to explain so we all can be safe and use MC IGF correct



Sent from my SAMSUNG-SM-G890A using Tapatalk

Ain't seen you post in a while man! That was a hell of a rant lol. You on that tren again?!? Just giving ya shit buddy

 

[Presser]

I could be wrong, but believe it should say 10mcg per tick even on a 50 i.u. syringe so long as that 50 i.u. syringe is half an ml or .5ml . However I.U. is not a weight measurement nor a volume measurement, I believe its a biological effects measurement the drugs activity is what i.u. measure which can vary , so this was standardized across boarders, I think lmao

Unless they do make a 50 I.U. syringe that holds a volume of 1 full ml, which I have no idea, but im guessing they’re most always .5ml which means, yes you do NOT change anything at all when measuring it out as you would on a 100 i.u. . You multiple each mark by 10 to get your mcg dosage whenever somehting is 1mg/ml

The photo should be edited unless someone can show me a 50 I.U. syringe that holds 1 full ml.

 

[Muscle mechanic]

Ain't seen you post in a while man! That was a hell of a rant lol. You on that tren again?!? Just giving ya shit buddy

Am OCD and have trouble being satisfied with it I explained well enough!
Was just concerned on getting photo corrected. I actually posted too much. Was editing and re-writing post while watching movie and playing game with my son.
I think I inserted previous post not posted when I would go back then didn't notice. Lol!!!
I forgot how to operate things...
No I haven't posted or even had phone in a bit took a vacation got some rest, ate shit food and getting back in gym.
It's all good and getting better just need to be more tolerant in sutuations....


Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Big Beef]

Am OCD and have trouble being satisfied with it I explained well enough!
Was just concerned on getting photo corrected. I actually posted too much. Was editing and re-writing post while watching movie and playing game with my son.
I think I inserted previous post not posted when I would go back then didn't notice. Lol!!!
I forgot how to operate things...
No I haven't posted or even had phone in a bit took a vacation got some rest, ate shit food and getting back in gym.
It's all good and getting better just need to be more tolerant in sutuations....


Sent from my SAMSUNG-SM-G890A using Tapatalk

Lots of sleep & shit food?? Sounds like jail! Lmao unfortunately, I know how it is... anyway, good to hear your back in the gym

 

[Muscle mechanic]

Lots of sleep & shit food?? Sounds like jail! Lmao unfortunately, I know how it is... anyway, good to hear your back in the gym

A vacation off the grid brother.
May have been the loony bin!!! Never know or may have had feeding tube in me in bed from wreck or coma.
Lol!!!
We say too much on open board we just as well put our social security number

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Big Beef]

A vacation off the grid brother.
May have been the loony bin!!! Never know or may have had feeding tube in me in bed from wreck or coma.
Lol!!!
We say too much on open board we just as well put our social security number

Sent from my SAMSUNG-SM-G890A using Tapatalk

Right!

 

[pgb]

I could be wrong, but believe it should say 10mcg per tick even on a 50 i.u. syringe so long as that 50 i.u. syringe is half an ml or .5ml . However I.U. is not a weight measurement nor a volume measurement, I believe its a biological effects measurement the drugs activity is what i.u. measure which can vary , so this was standardized across boarders, I think lmao

Unless they do make a 50 I.U. syringe that holds a volume of 1 full ml, which I have no idea, but im guessing they’re most always .5ml which means, yes you do NOT change anything at all when measuring it out as you would on a 100 i.u. . You multiple each mark by 10 to get your mcg dosage whenever somehting is 1mg/ml

The photo should be edited unless someone can show me a 50 I.U. syringe that holds 1 full ml.

iu means international unit. the 1,000 iu is the amount in the vial. the vial also has been reconstituted with one ml of liquid. thus we are converting our measure of iu's into ml. thus to measure the 10 iu's we are measuring 0.01 ml of liquid, or one mark on our syringe.

if you reconstituted with more liquid, the conversion would change. i'm not going to do that here, because it may confuse those already confused. i understood muscle mechanic's rant, as i understand ocd all too well. we just didn't have a name for it back in my day, lol, nor one for adhd.

 

[ndirish53]

I am going to get my syringes for MC's IGF. I am looking at either .3cc or .5cc insulin syringes. Thinking it would be easier to see how much to draw.
Question is what tick mark would I use?
I have read this sticky and am confused.
Thanks,

 

[Presser]

Tiny tiny amounts is all you draw up daddio

 

[Presser]

Floating sticky thread on igf for couple members who just asked identicle question!

Its easy to make a mistake but also very easy to understand the mcg measurements especially with the visual pics

 

[Presser]

How to measure micrograms with various size syringes

 

[Presser]

bump

 

[Presser]

Bumping for a customer asking about measuring dosages with different sized syringes

 

[lamarclark09]

This is really one of the best post I read today.

 

[Presser]

This is probably one of the MOST IMPORTANT topics on Measuring and Administering IGF1 lr3 Properly!

I will create a new post with The Most Important IGF 1 Information Distilled Down as this thread might be hard to follow lol