Hey guys, I'm new on this board so this is my first post.
I've just made a batch of test prop 50ml at 100mg/mL with the following recipe:
5g raw powder
1.2ml ba
11.5ml BB
Made up 50ml with GSO.
I dissolved the raw in the BA/BB mix by mixing and spinning the solution by hand about 5 mins until it was clear. I then heated the oil in the microwave 30secs at a time until it reached 260°f. I then dumped the mixture stinto the oil after letting it cool a couple minutes. After some swirling it went nice and clear. I then put a pin in the rubber stop of my 50ml bottle (to equalise pressure) and another with a whatman style filter attached, drew from my solution with a syringe then attached the syringe to the filter and pressed it through. Took about 30mins to filter 50ml. Afterwards I had a lovely clear vial of gear. Success. It did smell quite strong of the BA though, is this normal? Anyway, I pinned just 0.5ml to access any pain, and nothing. None from the needle going in, the injection, or afterwards, so all seems good?? Only problem is that as soon as I injected I thought "what if the gear is something else? Something dangerous? What if I used the wrong type of solutions? Are there different types of ba/BB or is it just what it is, all the same? So I gave myself an anxiety attack and had to pop a valium (diazepam). Just looking for some reassurance really as I got real scared I might have poisoned myself lol! It's been 2hrs since I pinned it and I feel fine, still no pain (and no crazy symptoms of poisoning)! Oh, I sterilised all my equipment with isopropyl alcohol too. Am i allowed to post where I order the raws from to see if anyone has experience with them?
Anyway, am I just overthinking it and being a paranoid scaredy cat??
Thanks, Santoro.
I've just made a batch of test prop 50ml at 100mg/mL with the following recipe:
5g raw powder
1.2ml ba
11.5ml BB
Made up 50ml with GSO.
I dissolved the raw in the BA/BB mix by mixing and spinning the solution by hand about 5 mins until it was clear. I then heated the oil in the microwave 30secs at a time until it reached 260°f. I then dumped the mixture stinto the oil after letting it cool a couple minutes. After some swirling it went nice and clear. I then put a pin in the rubber stop of my 50ml bottle (to equalise pressure) and another with a whatman style filter attached, drew from my solution with a syringe then attached the syringe to the filter and pressed it through. Took about 30mins to filter 50ml. Afterwards I had a lovely clear vial of gear. Success. It did smell quite strong of the BA though, is this normal? Anyway, I pinned just 0.5ml to access any pain, and nothing. None from the needle going in, the injection, or afterwards, so all seems good?? Only problem is that as soon as I injected I thought "what if the gear is something else? Something dangerous? What if I used the wrong type of solutions? Are there different types of ba/BB or is it just what it is, all the same? So I gave myself an anxiety attack and had to pop a valium (diazepam). Just looking for some reassurance really as I got real scared I might have poisoned myself lol! It's been 2hrs since I pinned it and I feel fine, still no pain (and no crazy symptoms of poisoning)! Oh, I sterilised all my equipment with isopropyl alcohol too. Am i allowed to post where I order the raws from to see if anyone has experience with them?
Anyway, am I just overthinking it and being a paranoid scaredy cat??
Thanks, Santoro.